VIAIR 485c Dual Pack

12 V Piston Compressor
Duty Cycle: 100% @ 200 PSI
Flow rate 2.24 CFM (cubic per minute)
Maximum 200 PSI = 13.8 bar
Fuse: 40 A (not included)
L / W / H = approx. 27.5 cm / 10.5 cm / 17 cm
3/8 "steel braided hose with check valve

To ensure trouble-free operation, the following points must be observed:
The compressor must only be operated with a 40 A fuse. A stronger or weaker fuse is not recommended. If several compressors are installed, each needs its own fuse.
The compressor must only be used in a dry environment and protected from heat.
The compressor runs dry and therefore requires no lubricant or oil.
The compressor must only be operated with a sufficiently charged battery, otherwise the connecting rod may be damaged by the excessive starting impulse.
A correct and sufficient connection to the body ground must be ensured.
The supply of fresh air must be ensured.

If you need relays, fuses and other accessories on demand, contact us so we can help you with your choice:

serviceclients@custom-detailing.com